Description
·PRAC-5T F Pedal Control
·PRAC-5T H Button Control
| Model | PRAC-1.5T | PRAC-3T | PRAC-5T | ||||||
| Maximum working height (mm) | 300 | 300 | 300 | ||||||
| Specification of booster cylinder (mm) | CPT-63-150-15 | CPT-63-150-15 | CPT-80-150-15 | ||||||
| Total stroke (mm) | 150 | 150 | 150 | ||||||
| Rapid Stroke (mm) | 135 | 135 | 135 | ||||||
| Supercharging stroke (mm) | 15 | 15 | 15 | ||||||
| Times of back and forth per minute | about 35 | about 30 | about 30 | ||||||
| Area of working bench (mm) | 310×265 | 310×265 | 310×265 | ||||||
| Power (AC,50HZ) | 220V | 220V | 220V | ||||||
| Weight (kg) | 130 | 135 | 135 | ||||||
| Mpa | Supercharging pressure |
Pre-pressure pressure |
Return pressure |
Supercharging pressure |
Pre-pressure pressure |
Return pressure |
Supercharging pressure |
Pre-pressure pressure |
Return pressure |
| 0.3 | 900 | 90 | 60 | 1500 | 90 | 60 | 3000 | 150 | 120 |
| 0.4 | 1250 | 120 | 80 | 2000 | 120 | 80 | 4000 | 200 | 160 |
| 0.5 | 1550 | 150 | 100 | 2500 | 150 | 100 | 5000 | 250 | 200 |
| 0.6 | 1850 | 180 | 120 | 3000 | 180 | 120 | 6000 | 300 | 240 |
| 0.7 | 2150 | 210 | 140 | 3500 | 210 | 140 | 7000 | 350 | 280 |
The actual output is about 80% theoretical output.
| Model | C | C1 | D | d | E | F | G | G1 | H | h | h1 | J | L | N |
| PRAC-1.5T | 580 | 275 | Φ53 | 30 | 130 | 260 | 310 | 400 | 1180 | 300 | 155 | 145 | 45 | 140 |
| PRAC-3T | 580 | 240 | Φ53 | 30 | 130 | 260 | 480 | 400 | 1200 | 300 | 155 | 145 | 45 | 140 |
| PRAC-5T | 580 | 240 | Φ53 | 30 | 130 | 260 | 480 | 400 | 1230 | 290 | 155 | 145 | 45 | 140 |
Drawing on physical dimensions
Supercharging Press PRAC
· Take compressed air as power source, easy to operate.
· There is not noise and environmental pollution generated by hydraulic system in standby timed, power consumption can be saved, and production costs can be reduced.
· Use the supercharging principle of air oil, to get quick action and high output. higher power requirements.
· Multi-functional purposes is suitable for pressure into the bearings, punching, riveting, assembly, cutting, etc.
· Output force is easily adjusted by adjusting air pressure, the required pressure can be gotten only by adjusting air pressure, it is simple and convenient.
· Type C machine bench structure, easy operation, convenient for material loading and unloading, consistent with working efficiency.
· Safety design, comfortable operation, human-based consideration suitable for long-tern operation.
· If need to do quick digression during operation, quick exhaust valve is optional.
