* If you have any enquiry with quotation or cooperation, please feel free to use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your attention!
·PRAD-1.5TF Pedal Control
·PRAD-1.5TH Button Control
Technical parameters
Model
PRAD-1.5T
Maximum working height
300 mm
Rapid Stroke
85 mm
Supercharging stroke
15mm
Area of working bench
350*240 mm
Power
AC220V 50-60 Hz
Times of back and forth per minute（stroke 100mm）
about 30 / min
Operating Pressure
Theoretic pressure
Weight
Mpa
Kg/cm2
psi
Supercharging pressure
Pre-pressure pressure
Return pressure
130 kg
0.3
3
110
900
90
60
0.4
4
120
1250
120
80
0.5
5
130
1550
150
100
0.6
6
140
1850
180
120
0.7
7
150
2150
210
140
Standard reference: sucharging pressure(5,10,15,20) stroke and total stroke(50,100,150,200).
The actual output is about 80% theoretic al output.
Drawing on physical dimensions
· Take compressed air as power source, easy to operate. · There is not noise and environmental pollution generated by hydraulic system in standby timed, power consumption can be saved, and production costs can be reduced. · Use the supercharging principle of air oil, to get quick action and high output. higher power requirements. · Multi-functional purposes is suitable for pressure into the bearings, punching, riveting, assembly, cutting, etc. · Output force is easily adjusted by adjusting air pressure, the required pressure can be gotten only by adjusting air pressure, it is simple and convenient. · Type C machine bench structure, easy operation, convenient for material loading and unloading, consistent with working efficiency. · Safety design, comfortable operation, human-based consideration suitable for long-tern operation. · If need to do quick digression during operation, quick exhaust valve is optional.
Pneumatic press have PRNA, PRNB, PRNC, PRND series, air oil pressure supercharging press have PRAC, PRAD series. There are some different between the two in operation.Pneumatic press PRNA, PRNB, PRNC, PRND series operationOne, to determine the electrical control circuit and air pressure source has been switched on, through the time switch setting time regularly.Two, with adjustable air cushi...
Drilling power head with a variety of functions, it can be boring and tapping operations, but also be able to install multiaxis control, to enhance efficiency. For higher precision products have good processing effect, but also for highvolume products with automated operation, the use of a very wide range in the enterprise specific performance advantages:1. Strong adaptability. Drilling power head...
