Why Damper windings used in synchronous motors

Synchronous motors are not self starting machines. These machines are made self starting by providing a special winding in the rotor poles, known as damper winding or squirrel cage windings. The damper winding consists of short circuited copper bars embedded in the the face of the rotor poles.

 

When an ac supply is provided to stator of a 3-phase synchronous motor, stator winding produces rotating magnetic field. Due to the damper winding present in the rotor winding of the synchronous motor, machine starts as induction motor (Induction machine works on the principle of induction. Damper windings in synchronous motor will carryout the same task of induction motor rotor windings. Therefore due to damper windings synchronous motor starts as induction motor and continue to accelerate). The exciter for synchronous motor moves along with rotor. When the motor attains about 95% of the synchronous speed, the rotor windings is connected to exciter terminals and the rotor is magnetically locked by the rotating magnetic field of stator and it runs as a synchronous motor.

 

Functions of Damper Windings:

• Damper windings helps the synchronous motor to start on its own (self starting machine) by providing starting torque
• By providing damper windings in the rotor of synchronous motor "Hunting of machine"can be suppressed.When there is change in load, excitation or change in other conditions of the systems rotor of the synchronous motor will oscillate to and fro about an equilibrium position. At times these oscillations becomes more violent and resulting in loss of synchronism of the motor and comes to halt

Tags:  Damper Winding  Self Starting Machine  Functions of Damper Windings  Squirrel Cage Windings 

<<Back to list

• Porous drilling CNC application and effect

  　　

   Porous drill known as drilling machine, multi-axis machine, multi-axis drilling device or multiple spindle head. Is a kind of applied in mechanical field drilling, tapping machine tool equipment. A typical porous drill as long as with ordinary drilling machine can a several or even dozens of twenty hole or thread one-time treatment.

   
  CNC porous drill is widely used in machinery industry parts of drilling and tapping processing. Such as valves, automobile, motorcycle porous components. Engine body shell, aluminum castings, the wheel hub, brake drums, brake discs, stee...

  Details

  Tags:  Numerical control porous drilling application Numerical control porous drilling effect CNC porous drill suppliers Nc porous drill manufacturers 

• Tapping machines improve work efficiency five major points

  　　

  Abstract: How to use the tapping machine is very important, because the correct use of tapping machine, can improve tapping machine work efficiency. 
   
  Customers in the use of method of tapping machine is very important, the right using method can improve the work efficiency of tapping machine, the opposite will reduce the efficiency of tapping machine, serious when can even damage to its, so what is the method can provide the tapping machine's work efficiency? Tapping machine manufacturers

  Details

  Tags:  Using tapping machine method Tapping machine efficiency Tapping machine manufacturers Tapping machine working main points 

• Hydraulic machinery hydraulic pump failure reason

  　　

   

      Hydraulic pump is the power component of hydraulic system, its role is to prime mover's mechanical energy convert into liquid pressure energy, refers to hydraulic system oil pump, it offer power to the entire hydraulic system.

      When hydraulic machinery hydraulic pump failure, can from the following three points to find the cause reason.

      1, checks up swing arm hydro-cylinder inner leakage condition. The easiest way is the rising of the movable arm to see if it has obvious free fall. If falling significantly disassemble cylinder to check, seal shoul...

  Details

  Tags:  Hydraulic machinery Hydraulic pump  Hydraulic pump fault reason Hydraulic damper High precision machine tool Superior quality tapping machine Hydraulic machinery factory 

• Deep hole power head manufacturer

  　　

   Power head also calls the dynamic cutter holder, is installed on the power tool turret, is driven by servo motor. This kind of cutter holder normally used in car milling compound machine, there are a few can be used in the driving force of knife tower on the machining center.

   
   
  Taizhou purros machinery co., LTD. Producing all kinds of power head, realize the high ratio of performance and high precision automatic feed power head. Below is a general way, the characteristics of deep hole power head:
  1, the biggest tapping capacity: aluminum allo...

  Details

  Tags:  Deep hole power head manufacturer Deep hole power head characteristics Deep hole power head suppliers Deep hole power head definition 

• Power head professional manufacturers

  　　

   Taizhou purros machinery co., LTD., specializing in the production and sales of drilling power head, drilling power head, tapping head, servo tapping machine, automatic drilling machine, bench drill, machinery, hydraulic damper, multi-axis device, power head jig, slide, etc. Products are exported to the americas, Australia and other countries and regions, favored by users of praise.

   
   
  At the side of luz to introduce the general PR5P type power head can match the product:
  1. The desktop support
  Applicable to arbitrary processing di...

  Details

  Tags:  Power head production Power head manufacturer Power head supplier Power head products