Purros specializes in manufacture and sales of Hydro Speed Regulator, Multi-Spindle Drill Heads and Self-Feeding Drill Units.
Our information
  • PURROS Machinery Co., Ltd.
  • Add: #58 YuanDian Road, YuanQiao, HuangYan District, Taizhou City, Zhejiang Province, China.
  • P.C.: 318000
  • Tel: +86 576 89898883
  • Fax: +86 576 89891099
  • Mobile: +86 13676697345
  • E-mail: amy@purros.com
  • Buy Multi Spindle Heads online
  • Automatic Drill,Special Purpose Machines

Radial drilling machine work matters needing attention

Abstract: Radial drilling machine is a kind of the hole processing equipment, can be used for drilling, reaming, reaming, tapping and repair the blowing end etc various forms of processing. Radial drilling machine at the time of operation should pay attention to in many matters. 

 

 

   Radial drilling machine is a kind of the hole processing equipment, can be used for drilling, reaming, reaming, tapping and repair the blowing end etc various forms of processing. Radial drilling machine easy to operate, flexible and wide scope of application, typical, especially suitable for the single piece or mass production with a perforated hole machining of large parts, is a common machine tool general mechanical processing workshops. 
 
   Radial drilling machine at the time of operation should pay attention to the items, there are a lot of PURROS vertical drilling machine staff related to remind everybody, radial drilling machine at work must be pay attention to the following: 
 
1, check before starting work, mainly used for drilling machine and job card; 
 
2, it is forbidden to wear gloves operation, girls braids should be rolled in the hat; 
 
3, the clamping workpiece must be solid and reliable;  
 
4, when using self-acting feed, to choose good feed speed, adjust good limit block; 
 
5, long drill around with iron filings, parking to clear; 
 
6, before work, must cross arm lock, in addition, when using, cross arm slewing range no barriers; 
 
7, at the end of the work, will be to minimize the beam location, spindle box near post, and will lock; 
 
8, are not allowed to be under the rotating knives, flip, conformity or measurement of workpiece, and hands are not allowed to touch rotating knives, in order to avoid injury; 
 
9, cross arm and the worktable are not allowed to store items; the work piece must be in accordance with the card tightly, to prevent the workpiece displacement cause major injury accidents and equipment accidents; 
 
10, fine reaming deep hole, detaching device and pin bar, not overexert, lest on hand against the cutting tool; 
 
 
TAGS:
Radial drilling machine definition, Radial drilling machine work matters needing attention, Radial drilling machine characteristics, Vertical drilling machine
 

Tags:  Radial drilling machine definition Radial drilling machine work matters needing attention Radial drilling machine characteristics Vertical drilling machine 

<<Back to list