Purros specializes in manufacture and sales of Hydro Speed Regulator, Multi-Spindle Drill Heads and Self-Feeding Drill Units.
Our information
  • PURROS Machinery Co., Ltd.
  • Add: #58 YuanDian Road, YuanQiao, HuangYan District, Taizhou City, Zhejiang Province, China.
  • P.C.: 318000
  • Tel: +86 576 89898883
  • Fax: +86 576 89891099
  • Mobile: +86 13676697345
  • E-mail: amy@purros.com
  • Buy Multi Spindle Heads online
  • Automatic Drill,Special Purpose Machines
Home:Hydro Speed Regulator: R2460-A Hydro Speed Regulator - Drilling Units Accessories

R2460-A Hydro Speed Regulator - Drilling Units Accessories

  • Total amount:$ 238.00
  • Fixed Block: *
  • Quantity: *
Hydro Speed RegulatorUSD 58.80/piece
Hydro Speed RegulatorUSD 238.80/piece
Roller Burnishing ToolsUSD 259.90/piece
Roller Burnishing ToolsUSD 229.90/piece
Multi Spindle HeadUSD 468.80/piece
Multi Spindle HeadUSD 518.80/piece
Self Feed Drill UnitUSD 898.80/piece
Special Purpose MachineUSD 000.00/piece

 

 

Model:R2460-A

Type:air-return

Maximum Stroke:60mm

Load Range:200-1500n

Withstand Impact Energy:2.3j

 

 

 

 

 

Purros Machinery also have other models (Maximum Stroke:40-180mm, Load Range:200-3000n, Withstand Impact Energy:2.3-3.5j)

 

Purros Machinery Hydro speed regulators are designed to control the forward speed (feed rate) of the Electro Pneumatic Drilling Units. Use of a regulator provides adjustable feed rates, faster cycle times, reduces burring, eliminates drill breakage, and prevents sudden forward surges at drill breakthrough. One regulator is required per Electro Pneumatic Drilling Units for drilling operations.

 

Even if remove the load of piston rod of R-A type hydraulic damper, the piston rod still can stay at original position, only provide compressed air piston rod can return, a multiple setp feed control can be carried out.

 

Air return regulators serve the same function as the spring return type in that they control the forward speed of the drill. However, the air type requires an air signal at the end of each drilling cycle to return the regulator to its original position. Also, these regulators are required for peck feed drilling as they are capable of holding the drilling depth at the end of each peck feed motion.

 

Features

1. With the position of the piston rod maintained along the strokes as desired efficient pack feed drilling is possible.

2. Longer strokes available for extended application purpose.

3. Easy to install, Leakproof, No need for piping or wiring.

4. Constant Speed.

5. Life of Millions of cycles without leaking.

 

 

 

  Notice: PURROS Company can also supply all kinds of dampers as well as the dampers listed in the above table, please contact agent or our company for the details.